High Energy Density Lithium Iron Phosphate Battery 12V 120Ah Wind Solar Hybrid System
Product description
| Configuration | 4S40P/4S24P |
| Chemistry | Lithium iron phosphate/lithium NMC |
| Working current | 50A - 0.25C |
| Maximum continuous discharge current | 100A - 0.5C |
| Pulse discharge current (less than 1 second) | 200A - 1C |
| Discharge end-off voltage | 8V/10V |
| Charging end-off voltage | 14.6V/16.8V |
| Standard charging current | 20A |
| Maximum charging current | 50A |
| Iner resistence | <70mΩ |
| Operating temperature | Charge: 0 to 45 °C Discharge:-20 to 60°C |
| Dimension | Can be customized |
| Weight | 16KG / 10KG |
Characteristics
1. You should Read the charge/discharge times because it is useful for quality dispute
2. You can Re-adjust the major parameters in accordance with different application
3. You should Read current ,voltage of the cells in series
4. You should Read other information like SOC, Temperature etc.
5. You can Know the remained capacity by LED indicator
Why is QH Technology Battery?
Our factory covers an area of 10,000 square feet and has nearly 500 employers, including 43 technical Research and Development specialists.
Our Annual battery production capacity is 30 million AH.
QH Technology Co., Ltd is committed to providing green energy batteries and insists our corporate spirit of “integrity, dedication, innovation, and quality”.
Use these batteries in series.
Most similiar battery manufacturers do not permit the battery to be used in series. We have researched and developed a new battery management board which will support voltages up to 48V, so these batteries can be placed in series in 12V, 24V, 36V, or 48V combinations. This helps with electric bikes, wheelchairs and other high voltage appliances. Like sealed lead-acid batteries, they can also be used in series and in parallel. Prior to series connection, it is better for you to charge each cell at 12V (14.6V peak) to ensure that they are balanced.
